Amphibious burner _ takes off oil gas manufacturer of aircraft of combustion of saltpetre burner _

Believe a lot of friends are in how to chooseBurnerProduct when, can have a few problems more or less, want to had solved this problem, above all we must understand burner, fuel, burn gasBoiler burnerchoose should ask according to the structural characteristic of boiler proper and function, combine user use condition, make correct comparison. ?

Can press commonly list a few principles to undertake choosing: ?

1. uses the category of fuel to choose according to the user, oily kerosene of fuel category liquid fuel, derv, heavy oil, residuum and useless oil; Aeriform fuelOily city gas, natural gas, liquefied petroleum gas, firedamp. The analytic data that use fuel should be necessary: ? Kerosene, derv is due and calorific quantity and density; Heavy oil, residuum and useless oil are due viscosity, calorific quantity, moisture, flash point, mechanical impurity, grey portion, freezing point and density; Burn gas pressure of due and calorific quantity, air feed and density. ?

2. chooses according to boiler function and structure of the chamber of a stove or furnaceFuel burnerIn nozzle pulverization means or type of flaming burning gas.

3. burner outputs power to should decide force photograph to match with boiler forehead, choose the figure of good blaze, be like length and diameter, make suit with photograph of structure of the chamber of a stove or furnace. The air that from blaze root ministry place of supply fuel combustion needs, make oily mist or light gas and air speed to mix equably, make sure combustion is complete.

4. burner adjusts extent wants big, the need that can get used to boiler bear to change, make sure below different operating mode perfect stability ground burns. ?

5. fuel pulverization digests the energy that waste to want little, obstruction of the device that move wind wants small. ?

6. flue gas is discharged and the influence of noise must accord with the requirement of environmental protection standard, the discharge capacity that basically is SO2, CO and NOx must the regulation under international, should choose the burner of low NOx low noise. ?

7. should choose to use integral type or fission type burner according to the particular case of boiler and user requirement. ?

8. should choose a structure simple, move reliable, facilitate adjust control and repair, the burner that implements combustion process automation easily. ?

9. answers burner brand, function, price, service life and after service to undertake be comparatived integratedly. ?

The leeway of 10. burner is divided outside wanting to consider to overcome the resistance of boiler proper, return the instruction that should consider flue gas system.

Pay close attention to us, content can be updated continuously, the problem perhaps needs to ask connectionCombustion machineIn relief far east of manufacturer high mountain, the technology after will offerring free carry out serves support.