Manufacturer of furnace of industry of _ of heat exchanger of air of _ of industrial kiln furnace

Industrial kilnFurnaceenergy-saving and main burn in improvement, strengthen heat preservation, use new technology, new technology and use 4 fields such as more than heat. Industrial furnace manufacturerThe energy-saving measure of energy-saving equipment limited company basically has Yue Yang far east below 4 kinds: 1. Use more than heat period 2. Reduce heat loss due to radiation 3. Improve air one fuel is compared 4. Improve combustion and operation method.

One, use more than heat

① is usedAir heat exchangerOr accumulation of heat implement warm-up air, reclaim with more than heat boiler, gas turbine more than heat;

② comes with more than heat mould of check of warm-up material, work, bracket;

Furnace of ③ low temperature uses heat of high temperature beyond;

The recycle of ④ protection gas.

2, reduce heat loss due to radiation

What ① improves car of furnace wall, stage to wait is adiabatic;

② popularizes technology of furnace kiln complete heat preservation, use different insulation material;

③ strengthens the heat insolation of water-cooling place;

④ improves the configuration of cooling pipe and design;

⑤ changes those who greet furnace door to push peristome is airtight;

⑥ improves arenaceous, the sealed means such as gas shade:

The weight that ⑦ reduces conveyer, labour to block brick of mould, bracket, tool to wait;

⑧ is rightIndustrial furnace kilnReach its accessory, heat preservation structure begins regular examination and maintenance, make sure crust of body of heater, hearth, condole hangs door of aperture of roof, furnace door to have whole effective adiabatic layer and sealing, reduce prediction of a person's luck in a given year of quantity of heat, transgression of heat vital energy or cold air are inspiratory.

3, improve air one fuel is compared

① sky lights compared automata;

② controls furnace pressure in order to reduce air leak;

③ furnace, the design research that burner configures.

4, improve combustion and operation method

① is adjusted and improve litre of thermometric scale to be mixed definitely heat temperature curve;

② improves the method installing furnace that handles material;

③ accurate control is heated or be cooled the temperature of the object, prevent to exceed temperature range of the regulation;

④ is strengthened production attempers and adjust, the basis heats product measure, heat temperature, execute concentration to open furnace or run production centrally, shorten two heat the sky between cycle burns the latency time between cease time and working procedure to reduce holding heat;

⑤ makes every furnace kiln is close to rated crop or rated bear to prevent crop too low exorbitant and raise hear rate;

Below the condition that ⑥ allows in craft condition, use shrinkage fitting of content be heatinged actively, send even outfit, heat etc heat form, raise shrinkage fitting temperature as far as possible, decrease to be heated the quantity of absorption of heat of content.