Burner of boiler low nitrogen,The burner flame cannot be ignited

Burner of boiler low nitrogenElectrode can strike a light, nozzle can fuel injection, butBurnerblaze cannot be ignited, this is what reason, can from below will 3 respects solve?

(1) inspects small hole of clean photoelectricity.

(2) detects with avometer whether does photoelectricity eye damage.

(3) checks burner controller. If photoelectricity key point is whole, should check controller each wiring has without become loose, originally closely afresh otherwise; If breakdown still did not eliminate, it is controller attaint.

Besides the electrode problem of combustion system, we are even referenced below these problems, it is normal that fuel supplies a system? It is normal to light baric force like what go up for tracheal path and whether is ball valve opened (air plane) ? Whether are there oil and the valve that answer oily conduit to go up for oil to open in gasoline tank (oily machine) ? Are the adjustment of all adjuster and controller and interlocking control normal? Like switch of attemperatior, discharge, water level switch, oil level switch, light baric power switch to wait.

If decide trouble is not caused by afore-mentioned reasons, must undertake checking a test to the concerned function of burner. Common method is take out certain and interlocking control, put through burner, watch process of the following job well and truly next, according to the phenomenon, can discover the problem is in immediately and eliminate.

If everybody still has a problem to perhaps need,ask withManufacturer of low nitrogen burnerThe engineer with Yue Yang energy-saving far east is contacted, will bring major and excellent service and product to you.