Manufacturer of burner of _ of burner of burner _ boiler

One, switch on the mobile phone

1.Before switching on the mobile phone, certain need examination lights angry valve to whether had been opened, otherwiseLow nitrogen burnerDo not work.

2.To new setupBoiler burnerboiler, before debugging, should detect seriously light gas to whether be accorded withBurnerrequirement; Whether does the testing instrument on pipeline of examination air feed reach conduit valve to leave normally, it is normal to close, after whether facilitating, use reach the overhaul.

3.To the conduit of new setup, should check the sealing of the installation dependability of all pipeline and pipeline seriously.

4.Operation personnel reads equipment operation instruction handbook seriously, adroitness control safety operates knowledge and method.

5.Use the user that alone aerification stands, want to assure to offer parameter of tolerance, air feed to accord with safe combustion to ask.

6.The electric source control on ark of the control that start is pressed twist, this duration shows a watch to show the temperature inside current furnace, this temperature is the outfit body of heater that installs newly environmental temperature.

7.Control of the fan that start is pressed twist, installation works in the fan on body of heater, if fan attaint controls ark,right now automatic protection does not enter next operations.

8.Support combustion when fan job does not have unusual appearance, restart combustion control is pressed twist, burn right now programme controll implement begin the work, it undertakes ignition, aspirated through due process, detect blaze, wait for a program to realize safe combustion finally.

9.Receive when combustion controller go against flaming signal (be like: Not stable, circuit has ignition failure, atmospheric pressure problem) when waiting for a problem, combustion controller is shut immediately burn gas and issue alarm signal.

10.If combustion controller calls the police, must be to solve breakdown hind to move restoration to just can continue to work to its hand by operation personnel.

11.When by production craft asks to need to adjust control temperature, operator should consult intelligent numerical control expresses a manual to undertake modulatory.

12.The operation of whole equipment, operation personnel should consult operating rules of safety of body of heater and manufacturing technology ask to undertake operating.

2, close machine

1.Close machine have two kinds of cases: 1) arrive at place set value to close automatically when the temperature inside furnace machine, right now operator need not any operations, when the controller when the temperature inside furnace is worth under set can switch on the mobile phone automatically; 2) stop artificially machine and hand over a class to stop when machine, right now operator should press the contrary order when switching on the mobile phone: ① shuts combustion control to press first twist; ② shuts fan to press again twist; ③ shuts power source to press finally twist③ shuts power source to press finally twistThe operation closes machine.

2.Pass machine time longer the operator below the circumstance should close valve of pipeline burning gas, lest the phenomenon of leak burning gas in low nitrogen burner happens.