The method that the pulverization degree of the soot after heavy oil burns reduces

Make the method that the pulverization degree of the soot after heavy oil burns reduces has a few a few times:

It is to make the viscosity of flaming heavy oil becomes low. Make the temperature when combustion is in OK to how inside certain limits, the viscosity value scale that is about to move to measure its correspondence through sampling becomes graph and according to graph undertakes be controllinged strictly. Additional, the data that studies according to concerning an experiment shows, pulverization is spent is 0.215 of its viscosity square. And of soot amount more or less to depend on the anxious carapace of the generation after combustion child diametical size, at the same time complete degree decided flaming whether completely again the diameter of anxious carapace. If all environments and condition are identical, so whether is combustion the viscosity decision of the heavy oil that uses by combustion completely, the degree of the grain after value of this kind of viscosity and pulverization becomes direct ratio.

2 be it is good to should use each property and the oil gun with fine structure

Equipment. Parameter and their structure runs differently in oil gun, can affect their pulverization degree and quality. So, want to define their quality, be about to use all sorts of different kind to have disparate particular test, to running parameter and structure undertake checking establish.

The carbon black that in wanting to reduce the smoke of generation, contains kind with the rest model the scale of soot grain, the C02 that is about to ensure to there is balance state in combustion furnace and 02 content, still have should make the combination that among them fuel and air had been in, such ability ensure inside combustion furnace mix adequately to burn then.

Anxious to making carapace kind with the rest kind soot becomes the method with little part, essential is the rate that raises burning oil to drip. So heat preservation, prevent air leak and hold accuse to balance air content and heat to its as far as possible, when these can be accomplished, the temperature nature inside combustion furnace can become tall. Achieve basic method thereby.

To make C02 and the generation quantitative change of 02 small, the kind that can add heavy oil additive through using is achieved make oil drips again the purpose of pulverization.

So, adopt the method of above, when reentry burns all right, the aerosol that obtains eduction undertakes investigating getting again, among them chroma still had soot quantity to be reduced greatly. Explain these technologies have very big effect to improving this aspect. Make discharge capacity adopted relevant provision.